D.I.Y ........Shorten / Lengthening of system | Installation | Removal | Cup replacing

..............Contact us now! 0832872026 .. 083 287 2026 .. 083 287 2026

Removal instructions:

REMEMBER:  Do not pull on the rope!!!
As the system will grip the moment you attempt to extract the pipe, ensure that the gripper is loosened before the system is removed.
Loosen the chain and springs, using a separate rope (not supplied) to fasten the
t-piece. 

Pull up the system and remove the base plate. 
While the rope (in the hole) is kept taut, use the weight of the system to loosen the gripper by pushing the pipe down. 

The rope will give as the gripper loosens.  Pull the rope taut again and lift the system over the horizontal strut of the windmill tower.